The Replacement Mounting Plate for Thule Trail Large and Medium Cargo Baskets - Qty-1 # 1500052558 and the Replacement U-Bolt for Thule Trail Large and Medium Cargo Baskets # 1500052553 are the correct mounting hardware for a Thule Trail XT Roof Cargo Basket TH865XT. view full answer...
Do you know which hitch you have? There should be a sticker on it with a part number. The Curt # C13073 you'd looked at would be a fit for 2010-2013 Hyundai Santa Fe models and wouldn't fit your vehicle.
On your model year, the larger front-most holes closest to the front of the vehicle are M12 x 1.25 x 40mm Class 10.9 Hex Bolts which use a 1/2 inch conical toothed washer and the remaining bolts closer to the rear of the vehicle are M10 x 1.25 x 40mm Class 8.8 hex bolts which use a 3/8... view full answer...
The Yakima HoldUp 2 Bike Rack is offered for both 1-1/4" trailer hitch receivers with part # Y02445 and 2" trailer hitch receivers with part # Y02443. In order to use the 1-1/4" version with a 2" trailer hitch receiver you will need the Replacement Tongue for Yakima HoldUp Bike Racks part # 8880580 and the Replacement Hitch Bolt and Clip for Yakima HoldUp part # Y8890200. view full answer...
The Curt hitch part # C13153 is a confirmed fit for your 2017 Hyundai Santa Fe Limited and would be a great option for towing a camper like your Micro Minnie. The next thing you need is trailer wiring to control the taillights of your trailer. For that the Curt harness part # C56184 is a great option as it's easy to install and very reliable.
Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch... view full answer...
The Rhino-Rack Mountain Trail Rooftop Bike Carrier # RBC035 that you referenced uses a flexible high density polymer (in other words, very strong plastic) strap to secure the rear wheel. This strap is not what holds the rack to the vehicle rooftop crossbars; it only secures the bike to the carrier rail. The carrier itself attaches to roof crossbars with a mounting bracket that tightens with hand knobs.
The Mountain Trail Rooftop Bike Carrier is covered under Rhino-Rack's limited lifetime... view full answer...
The Replacement Cover # 852-2382001 will fit your Thule 460R Rapid Podium foot. This is the same cover which is used on the 460 Podium foot. view full answer...
The anti rattle pin for Curt bike rack # C18087 isn't available as a replacement part. However, it is the same pin as # C22321 for a 2 inch hitch receiver and # F-315 for a 1-1/4 inch. view full answer...
According to Dexter Axle, who purchased Titan a few years back there really isn't a definitive method to bench test the shock absorber used in the Titan Model 60 coupler. If you can easily move the shock by hand, it's worn to the point where it should be replaced. It should take a significant amount of force to move the shock.
Should it need replacing, the # T2336200 replacement shock would be the proper replacement. view full answer...
The replacement hardware for your Curt Trailer Hitch Receiver # C13152 is found in Hardware Kit # RHK. You will just enter the hitch number 13152 in the box and then select Curt from the drop down for manufacturer. You will then be sent all the appropriate hardware that originally came with the trailer hitch so you can install it view full answer...
Yes, you can replace just the damaged connector on the 4-pole harness on your 2013 Hyundai Santa Fe GLS. Hopkins part # HM48205 includes both vehicle- and trailer-side connectors (giving you a spare for the trailer) and quick-splice connectors. Similar products you might prefer include # C58044 that gives you a 60-inch length and # HM48030 which features an ergonomic-style plug.
You will connect the white, brown, yellow and green wires color for color. I suggest wrapping the splices with... view full answer...
There's still a really good chance the trailer wiring install harness for your 2019 Hyundai Santa Fe is present which will allow the Curt T-Connector part # CU94FR to install. This plugs into your Hyundai Santa Fe's factory tow package wiring harness, which is located behind the rear bumper on the driver's side of your vehicle. I attached a picture of where the harness will be plus a link to the install instructions as well.
You might check the pins for voltage with a circuit tester like... view full answer...
The Thule Podium 460 you referenced for old square bars has been discontinued so that is why the expert answers suggest using the Evo Fixpoint Feet # TH49SC for use with the new Thule SquareBar that have a slot in the bottom like the aero style bars. The old Thule square load bars have been discontinued and replaced with the SquareBar like # TH712400.
This bar is not designed for the older wrap around style mount but will use the channel mount like the aero bars were already using.... view full answer...
I spoke to my contact at Sportrack and she informed me that the bolt of the SportRack Hitch and Cable Lock # A32022 is not offered separately. The most practical way for you to get another bolt would be to get the Anti-Rattle Hitch Lock # SR0901 and just use the bolt of the kit. view full answer...
The bolts included with the Draw-Tite Class III # 75471 Hitch are Class 10.9. They're 10mm in diameter, 30mm long and have a 1.25 thread pitch.
If you're needing replacement installation hardware, we can supply a replacement hardware kit for you. You'd use part # RHK, and on the product description page you're taken to, you'd input 87414 for the hitch part number and Hidden Hitch as the name of the manufacturer (as shown in the diagram I provided.)
To see other accessories available for... view full answer...
We do!
A wide range of bike rack replacement parts are offered for most major brands like Thule, Yakima and Swagman. The linked page will show you all replacement rubber straps and prices.
For example, if you have a Thule rack just click on that brand at the top of the page to see their replacement straps, such as # 852-3006-001 or # 753-3535. view full answer...
It looks like the older 945 version of the Thule Hitching Post was designed for a 2" hitch so you may have a newer version that would require the Adapter # 853-7489. If you can send me some photos of your current bike rack I can help you determine what you have and what adapter will be needed.
The adapter # 853-7292 that you referenced is not a fit for a Thule Hitching Post bike rack.
I have attached a link to a video of the 7489 adapter that you can check out. view full answer...
Usually a 7-way connector on a vehicle will be mounted either to a tab that is built in to the hitch or to a cut-out on the vehicle bumper. There are also separate mounting plates that can accept a 7-way connector which you can place as you prefer. One example is # 18138 from Draw-Tite which comes complete with hardware for mounting both the bracket and the 7-way.
The linked video shows installation on a 2005 Santa Fe. view full answer...
For your 2015 Hyundai Santa Fe GLS the Draw Tite hitch part # 75776 that you referenced is a confirmed fit and would work well. Then for trailer wiring the correct harness is the part # C56332 that you referenced. And to convert it to a 7-way all you need is the part # ETBC7.
Then for a brake controller the # TK90160 is a great option.
I attached a couple install videos for you to check out as well. view full answer...
The Thule Replacement FootBase # 753-2149 does not work with the Thule fit kit # THKIT4029 which is what fits on your 2014 Hyundai Santa Fe Sport. I confirmed this with my contact at Thule.
If you need a replacement fit kit you can use part # THKIT4029 which is a set of 4 mounting brackets and 4 foot pads. These are not offered singly, only as a set of four. view full answer...
We have the replacement screw you are looking for with the part # Y8880150 which matches up to the nut of the # Y8880279 which is M6. view full answer...
Go To Results